Your Ad Here

Setting the Start of Design/End of Design sequence

Wednesday, June 23, 2010
In addition to any End of Design function, some machines require extra Empty Stitches and Empty Jumps in order to stitch the start and end of a design. Other machines require a Stop function. Depending on the machine type, you may also require commands to initialize the machine or trigger the frame out exit after stitching.

Note : Remember that these fields show the number of extra codes you want to insert in addition to the default values.


When starting with Chain stitching, an empty stitch (non-data) code will automatically be inserted at the start of the design. When starting with Moss stitching, an empty stitch (non-data) and a stop code will be automatically inserted at the start of the design.

Do not digitize two Empty Stitches at the beginning of the design, as this will affect registration. Avoid using Empty Stitches elsewhere in the design. Other Tajima Chenille values are the same as the standard lockstitch Tajima machine values.




To set the Start of Design/End of Design sequence

1. Access the Machine Format Values dialog.

Note : Only fields relevant to the selected machine format will appear.



Setting the Start of Design/End of Design sequence


2. Click the Advanced tab and enter the Start of Design sequence.

! In the 0:0 Jump field, enter the number of Empty Jumps to insert at the start of the design.
! In the 0:0 field, enter the number of Empty Stitches to insert at the start of the design.

3. In the End of Design panel, enter the end of design sequence.

! In the second 0:0 Jump field, enter the number of Empty Jumps to insert at the end of the design.
! In the 0:0 field, enter the number of Empty Stitches to insert at the end of the design.

4. Click Save.
5. Click OK.