Your Ad Here
Showing posts with label 3. Digitizing Automatic Chenille. Show all posts
Showing posts with label 3. Digitizing Automatic Chenille. Show all posts

Converting a Complex Fill object to a chenille object

Sunday, May 31, 2009

You can convert a Complex Fill object to a chenille object uing Compound Chenille. This will add offset borders and a chenille fill. Multiple offset runs are generated automatically from the same boundary as the fill.



To convert an embroidery object to a chenille object

1. Select the Complex Fill object.
2. Click the Chain or Moss icon.
3. Click a fill stitch type icon, Straight, Perpendicular Fill or Island Coil.
4. Click the Compound Chenille icon.

Offset borders and a chenille fill are added to the object. To adjust the values see Adding automatic offset borders after the fill.

Converting a Complex Fill object to a chenille object

Note Input B objects can be converted to Complex Fill, then apply Compound Chenille.


Read more »

To set the offset needle height

Wednesday, May 27, 2009
1. Select the Compound Chenille object.

2. Right-click the Compound Chenille icon.

The Effects > Compound Chenille tab opens


offset needle height

3. Select the height required for offsets before and after fill.

4. Click OK.



Read more »

Setting the offset needle height

Saturday, May 16, 2009
The Needle Height controls the height of the loop formed by the Chenille machine when it is sewing a Moss stitch, and the width of the Chain stitch.




Setting the offset needle height


Moss can be stitched using different needle heights: lower for run around and higher for fill. In conjunction with Chain stitches, the design builds up in height from the edges to the middle. You may use different needle heights for different color areas. You may also use different needle heights for filled areas and borders. Needle height has much less effect on Chain stitches.

If you intend to use loops of various height, adjust the needle height rather than the stitch length. Even though the stitch length affects the loop height, it is easier and more accurate to adjust the needle height. See Selecting explicit needle height for details.

You can change the needle height for the stitches in the offset borders individually. For each of the offsets, select a needle height from the drop down list.


Read more »

Adjusting automatic offset stitch type and values

Friday, May 8, 2009
Adjusting automatic offset stitch type and values
The offset is the border around the filled shape. A border can be added before and/or after the fill. You can change the stitch type and the width of the offset.



For the Before Fill offset, you can adjust the number of overlapping stitches, run direction, offset stitch type, offset distance, needle height and stitch length for Moss and Chain stitches.

For the After Fill offset, you can adjust the fill stitch offset distance, offset stitch type, offset distance and needle height.


To adjust automatic offset stitch tpe and values

1. Select the object.
2. Right-click the Compound Chenille icon.
The Effects > Compound Chenille tab opens


Adjusting automatic offset stitch type and values

3. Select the Compound Chenille checkbox.
4. Enter the number of overlapping stitches between the offset runs.
Overlapping Stitches allows you to shift the connectors between Offset Runs by a few stitches to prevent stitches building up at the joins. Also, the connectors are less visible if they are not in one line.


Adjusting automatic offset stitch type and values

5. Select the run direction for the offset borders

  • CW: to stitch in a clockwise direction

  • CCW: to stitch in a counterclockwise direction
  • The correct stitching direction is important for Moss borders.

    6. Select the outline stitch length.
    Outline Stitch Length allows you to set the stitch length for either Moss or Chain stitch boundaries.
    7. Decide how many offset boundaries to generate before the shape is filled.

  • Offset 1, 2 and 3 sets the number of offset boundaries of the shape are used with either Moss or Chain before the fill stitching. The stitch boundaries are generated before the fill stitching. They hold the fabric in place and provide clearer edge definition for shapes. Offset Moss or Chain stitch outside is used as highlight.


  • Adjusting automatic offset stitch type and values

  • Needle Height controls the height of the loop formed by the
    Chenille machine when it is sewing a Moss stitch, and the width of the Chain stitch.


  • Adjusting automatic offset stitch type and values

    8. Select the Stitch Fill checkbox to fill the shape with stitches.

    If it is cleared, the shape will not be filled.



    Adjusting automatic offset stitch type and values

    9. Enter a Fill Offset Distance.

  • Fill Offset Distance sets the distance between the digitized boundaries and the filled area. It is always measured from the digitized boundary, not from the last Offset Moss or Chain stitch. Enter 0.0 mm to set the edge of the filled area on the digitized boundary. Enter a positive value to set the edge of the filled area inside the shape. Enter a negative value to set the edge of the filled area outside the shape.


  • Adjusting automatic offset stitch type and values

    10. Decide how many offset boundaries to generate after the shape is filled.

  • Offset 4, 5 and 6 allow you to stitch multiple offset boundaries of the shape with either Moss or Chain. The stitch boundaries are generated after the fill stitching. Offset (Units) specifies the distance between the digitized boundary and the Offset. Enter a positive value to generate parallel Offsets inside the shape or a negative value to generate Offsets outside the shape.

  • Needle Height controls the height of the loop formed by the Chenille machine when it is sewing a Moss stitch, and the width of the Chain stitch.


  • 11. Click OK.


    Read more »

    Adjusting offset stitch length

    You can adjust the length of the Chain and Moss offset stitches. Stitch length should be constant for the same thread type throughout a design. If the stitch length varies, the height of the Moss loops and the width of the Chain loops will also vary, causing uneven embroidery. The Chenille machine pulls up the same length of yarn for each loop according to the current
    needle height setting.


    If you intend to use loops of various height, adjust the needle height rather than the stitch length. Even though the stitch length affects the loop height, it is easier and more accurate to adjust the needle height. See Selecting explicit needle height for details.

    To adjust offset stitch length

    1. Select the Compound Chenille object.
    2. Right-click the Compound Chenille icon.
    The Effects > Compound Chenille tab opens


    Adjusting offset stitch length

    3. In the Outline Stitch Length panel, enter the stitch length for Moss or Chain offsets.
    4. Click OK.



    Read more »

    Changing run stitch direction

    You can set the run stitch direction for the offset borders. The correct stitching direction is important for Moss borders.

    Changing offset stitch direction

    1. Select the Compound Chenille object.
    2. Right-click the Compound Chenille icon.
    The Effects > Compound Chenille tab opens


    Changing run stitch direction

    3. Select the run direction for the offset borders

  • CW: to stitch in a clockwise direction

  • CCW: to stitch in a counterclockwise direction


  • 4. Click OK.
    Read more »

    Changing the number of overlapping stitches

    Overlapping Stitches allow you to shift the connectors between Offset Runs by a few stitches to prevent stitches building up at the joins. Also, the connectors are less visible if they are not in one line.


    Changing the number of overlapping stitches

    To change the number of overlapping stitches

    1. Select the Compound Chenille object.
    2. Right-click the Compound Chenille icon.
    The Effects > Compound Chenille tab opens


    Changing the number of overlapping stitches

    3 Enter the number of overlapping stitches between the offset runs.
    4 Click OK.
    Read more »

    Adjusting the Compound Chenille values

    The Compound Chenille dialog allows you to:

  • set the number of offset runs stitched before the fill , including a run on the actual boundary, or none at all

  • set the offset distance for fill, and fill is generated or not

  • set the offset distance for 1st offset run (offset values multiply for multiple runs) or set individual offset distances for offsets (distances may be positive or negative)

  • overlap stitches on the offsets

  • change the run stitch direction, clockwise or anti-clockwise

  • adjust Chain stitch and Moss stitch length for offset runs

  • set the offsets to be moss or chains with optional height values for machines which support needle height controls

  • set offset needle height.
  • Read more »

    Adding automatic offset borders after the fill

    offset borders after the fillYou can add up to 3 offsets after the fill, as well as Chain, Moss and needle height.. Offset Moss or Chain stitch generated inside the shape is used to define the shape.

    Enter a positive value to generate parallel offsets inside the shape or a negative value to generate offsets outside the shape.

    To add automatic offset borders after the fill

    1. Select the Compound Chenille object.
    2. Right-click the Compound Chenille icon.
    The Effects > Compound Chenille tab opens
    3. Select the Compound Chenille checkbox.

    offset borders after the fill

    4. Decide how many offset boundaries to generate after the shape is filled.

    Select a stitch type for each of the offsets, Offset 4, 5and 6 from the dropdown lists.

    ! Chain: offset stitched in Chain.
    ! Moss: offset stitched in Moss.
    ! None: no offset.

    The first offset is usually stitched with Chain and the others with Moss.


    5. For each of the offsets, select an offset distance.
    6. For each of the offsets, select a needle height for each of the offsets.


    offset borders after the fill

    7. Click OK.
    Read more »

    Adding automatic chenille fill

    You can choose to include or exclude the fill stitch. Exclude the fill when you are digitizing multiple chenille objects using Input A, B or C and only need the automatic offsets for the border. This technique is used to generate multi-colored chenille objects. You can also set the distance of the fill from the border.

    To add automatic chenille fill

    1. Select the Compound Chenille object.
    2. Right-click the Compound Chenille icon.
    The Effects > Compound Chenille tab opens
    3. Select the Compound Chenille checkbox.


    automatic chenille fill

    4. Select the Stitch Fill checkbox to fill the shape with stitches.

    If it is cleared, the shape will not be filled.

    automatic chenille fill

    5. Enter a Fill Offset Distance.

    Fill Offset Distance sets the distance between the digitized boundaries and the filled area.


    It is always measured from the digitized boundary, not from the last Offset Moss or Chain stitch. Enter 0.0 mm to set the edge of the filled area on the digitized boundary. Enter a positive value to set the edge of the filled area inside the shape. Enter a negative value to set the edge of the filled area outside the shape.

    automatic chenille fill

    6. Click OK.
    Read more »

    To add automatic offset borders before the fill

    1. Select the Compound Chenille object.
    2. Right-click the Compound Chenille icon.
    The Effects > Compound Chenille tab opens
    3. Select the Compound Chenille checkbox.

    automatic offset borders before the fill

    4. Decide how many offset boundaries to generate before the shape is filled. Select a stitch type for each of the offsets, Offset 1, 2 and 3 from the dropdown lists.

  • Chain: offset stitched in Chain.

  • Moss: offset stitched in Moss.

  • None: no offset.


  • The first offset is usually stitched with Chain and the others with Moss.

    automatic offset borders before the fill

    5. For each of the offsets, select an offset distance.
    6. For each of the offsets, select a needle height for each of the offsets.
    7. Click OK.
    Read more »

    Adding automatic offset borders before the fill

    automatic offset borders before the fillYou can add up to 3 offsets before the fill. Set the distance between the digitized boundary and each offset, as well as Chain, Moss and needle height. The stitch borders hold the fabric in place and provide clear edge definition for shapes.

    Offset Moss or Chain stitch generated inside the shape is used to define the shape, while outside Offset Moss or Chain stitch may used as a highlight. Enter a positive value to generate parallel offsets inside the shape or a negative value to generate offsets outside the shape.
    Read more »

    Digitizing chenille automatically

    Digitizing chenille automatically
    Compound Chenille effect generates multiple offset runs automatically from the same boundary as the fill. You can set up to 3 offsets before and after the fill, each with their own values for the offset distances, as well as Chain, Moss and needle height.


    Digitizing chenille automatically with Compound Chenille

    Using Compound Chenille allows you to:

  • generate up to 3 offsets before the fill

  • choose to include or exclude fill

  • generate up to 3 offsets after the fill



  • Digitizing chenille automatically

    To digitize chenille automatically with Compound Chenille

    1. Click the Chain or Moss icon.
    2. Click the Compound Chenille icon.
    3. Select a chenille fill stitch.
    4. Digitize the boundary of the shape using Complex Fill, by marking reference points around the outline of the shape.

  • Click to enter corner points.

  • Right-click to enter curve points.


  • Tip Use the prompts in the prompt line to help you digitize. If you make a mistake, press Backspace to delete the last reference point. Press Esc to undo all new reference points. Press Esc again to exit digitizing mode.


    5. Close the shape.

  • To close the shape with the same type of reference point as the last you digitized — i.e. corner or curve — simply press Enter.

  • To close the shape using a different type of reference point, mark the last on top of the first and press Enter.



  • Digitizing chenille automatically

    6. Press Enter.
    7. Mark the entry and exit position by clicking outside the object boundary.

    Tip To minimize segments and gaps in your embroidery, place the entry and exit points opposite each other on the outside boundary. Then define the stitch angle so it is perpendicular to the line between the entry and exit points.


    8. Define the stitch angle by digitizing two points.

    Digitizing chenille automatically

    9. Press Enter.

    Note Complex Fill objects may be stitched out in several smaller segments, joined by travel runs. All segments and boundaries in a Complex Fill object are part of the same object.
    Read more »

    Digitizing Automatic Chenille

    Thursday, May 7, 2009

    Objects stitched with a Chenille stitch need to have a border stitched around to hold the stitches inside the shape and provide clearer edge definition for shapes. Offset Moss or Chain stitch generated inside the shape is used to define the shape, while outside Offset Moss or Chain stitch may used as a highlight.

    This can be done autoamtically using the Compound Chenille tool with Complex Fill, when multiple offset borders can be automatically generated from the same boundary as the fill. Compound Chenille can automatically generate up to three offset borders before and up to three border after the fill stitching. Offset runs can be set up to stitch either Moss or Chain, at specific offsets and with specific needle heights. When the compound object is scaled, these offsets maintain all their values.

    You can also digitize Compound Chenille borders around existing objects created with other input tools by excluding the fill stitching. See adding compound chenille borders.

    Objects stitched with a Chenille stitch need to have a border stitched around to hold the stitches inside the shape. Compound Chenille allows multiple automatic offset borders to be automatically generated before and after the fill area stitching. Offset runs can be set up to stitch with either Moss or Chain, at specific offsets and with specific needle heights.

    Only objects digitized with Complex Fill can use Compound Chenille. This section explains how to create automatic chenille using the Compound Chenille feature, as well as change stitch settings to obtain the best results.

    Read more »